...Foot pounds (Final torque) Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in ...
what does 90 degrees more torque mean it should be foot pounds of torque or inch pounds of torque. there are two types of torque wrenches foot pounds and inch pounds. Good Luck
Exhuast manifold torque 38 foot pounds, Head bolts are 38 Foot pounds after you add sealant to the bolts then after torque go another 130 degrees. Tighten center 4 bolts in sequence another 30 degrees
Question about Oldsmobile Cutlass Supreme
foot-pounds of torque. and i,m sorry i cant seen to remember the order Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using
...to the manual (Chiltons). #1 YOU MUST USE NEW ROD BOLTS AND NUTS !!!! #2 TORQUE TO 17 FOOT POUNDS !!!! #3 TORQUE TO 32 FOOT POUNDS !!!! #4 TIGHTEN AN ADDITIONAL 90 TO 120 DEGREES !!!! #5
...I mean screw cap top block. Replace bolts and torque to 65 foot pounds and this is the 3rd torque work up to it then turn the bolt to 90 degrees the torque should show 90 foot pounds or ...
Question about Oldsmobile Cutlass Supreme
...bolt torque specs for a 94 volvo 960 6cyl twin cam engine and also the cam and crank timing marks you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you ...
Question about Oldsmobile Cutlass Supreme
foot pounds mean? IE: 25lbs. + 60 degrees + 60 degrees + 60 degrees + 10 degrees This is a method of specifying how many additional degrees of rotation to turn a bolt after reaching a specified torque
94 2.4 head torque in pounds i have a manuel but it says 90deg an i wanted to know if some one figured it out in pounds degrees has to be a misprint it should be 90 foot pounds instead
...foot pounds in the order first described above after that give them all 1/4 turn more in the same order as you tightened them The specs I had gotten said after the bolts are torqued to 18 ft lbs. to ...
775 questions posted
Usually answered in minutes!
697 Questions
488 Questions
387 Questions
236 Questions
203 Questions