1993 Oldsmobile Cutlass Ciera "replace ignition switch" Questions

Ad

Question about Oldsmobile Cutlass Ciera

1 Answer

replace ignition key lost key need guide for ignition key replacement I replaced the ignition on my truck. There should be a plastic shroud on the bottom of the steering column. Locate the screws and ...

Ad

...ignition switch. I once had a 1993 Buick that would die intermittently with no rhyme or reason. Turned out to be the ignition switch. And my daughter has a 1995 Camaro that when you would start ...

Ad

Question about Oldsmobile Cutlass Ciera

1 Answer

replace the washers in a brand new ignition switch to match your existing keys. Removing the lock cylinder could be a bit of a problem if you can't wiggle the ignition switch at all. However, don&

Question about Oldsmobile Cutlass Ciera

4 Answers

...ignition switch failed and its possible that you need replaced. Good luck. Watch this video- Change ignition switch. You will have to lower the steering column and you will find it near the bottom of ...

Question about Oldsmobile Cutlass Ciera

1 Answer

replace the ignition cinender to replace the ignition cylinder you will need to remove the steering wheel,the horn contact,the compression plate, the hazard button,the blinker plate, and then you will

Question about Oldsmobile Cutlass Ciera

1 Answer

...replace the ignition switch. you need to remove the steering wheel with a puller then remove the screw holding the blinker lever now remove the three screws holding the directional switch you will ...

Question about Oldsmobile Cutlass Ciera

3 Answers

Replace the oil pressure switch next to the oil filter. When you turn on the ignition the fuel pump runs to prime the system then turns off. Then the oil pressure switch runs the fuel pump to keep the

Question about Oldsmobile Cutlass Ciera

1 Answer

all of your wiring leading to and from your ignition switch. Look for wires that have been worn through. If you don't find any worn wires then you may have to replace the switch. I hope this helps

Question about Oldsmobile Cutlass Ciera

1 Answer

...ignition switch connection. Replacing the ignition switch fixed it for good. One thing that will really help you is to notice you dash lights when this happens. If the dash lights go out when the car ...

Question about Oldsmobile Cutlass Ciera

1 Answer

how do i replace the ignition lock cylinder on a 1992 oldsmobile cutlass ciera without a key YOU NEED KEY IGNITION  SWITCH TO TURN IGNITION LOCK IN THE RUN POSITION.

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

796 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...