...Harmonic balancer). As far as being easy is concerned some are not so easy as some require the removal of the harmonic balancer to get to it.. but you might be lucky Gm is pretty good at making the ...
Question about Oldsmobile Cutlass Ciera
...remove the crankshaft itself.) Check your local parts store for a harmonic balancer puller -- I got one from NAPA for about $75 that allowed me to pull the balancer without removing the ...
...harmonic balancer is on very tight. To loosen without an impact wrench, remove starter motor and wedge a piece of wood against the flywheel, or use a pry bar and hold the ring gear on the flywheel ...
Question about Oldsmobile Cutlass Ciera
remove a harmonic balancer. I've got to the point of taking it off. The pulley remover is placed. But the bolt when completely down only turns the balancer. How to fix please I'm removing the harmonic
Question about Chevrolet Cars & Trucks
...remove a harmonic balancer on a 1966 chevy c10. Also is there a bolt I need to remove first? And is there a key way. So I can make sure it goes back on in the right position? you will need a harmonic ...
harmonic balancer. A special tool is required. i had my dad make one because he has access to whatever he needs at the factory. but you can get them at the dealer. i have no clue how much they cost. I
...remove the harmonic balacer I would recommend using an impact wrench. It not only will break the nut loose without turning the engine over, but the impaction will usually break the balancer loose of ...
...harmonic balancer? Depending on year/make/model. An air gun or strong electric gun works best to remove the bolt securing the balancer to the crankshaft. Some but not all models will need a puller to ...
...harmonic balacer off my motor with out taking it a part? You will need to remove anything interfering with a balancer removal tool. You will need to remove the drive belt and belt pulley from the ...
...harmonic balancer. Never try to remove it without a puller. You may be able to rent one at the auto parts store or borrow one from a friend. Hope this helps. Yes you do. Depending on the puller you ...
650 questions posted
Usually answered in minutes!
575 Questions
540 Questions
476 Questions
412 Questions
332 Questions