1991 Oldsmobile Cutlass Ciera "replacing crank sensor 2" Questions

crank sensor, module and computer. first time this happened, replaced battery & car started every time for 2 years straight. can drive car then try to restart 30-45 minutes later & it will not

...sensor fail? I have bought everything new at Autozone. Granted its all warrantied, but this is ridiculous! HELP PLEASE!! I would check for a short somewhere in the wire harness or check the bell for ...

Sensor, Crank Position Sensor, Mass Airflow Sensor or even a bad Ignition Module. Note: Ignition coils can be tested by using an ohmmeter (you will need the primary & secondary resistance values).

...crank sensor. The module sits under the coils. Check all coils for spark. If any coil doesn't spark, you can try replacing just that coil, but the problem may still be the module underneath. If ...

...crank sensor,fuel pump relay,altenator,battery,oil pressure switch,Ecm Oh and I checked all the grounds and the fuel pump psi is constant@40 and still no spark or start Are you getting power to the ...

...sensor on 1993 olds culass sierra with 3.3 engine. Do I need to remove the harmonic balancer? If so I cant find holes in the slots on the balancer to thread bolts into to pull balancer off Here is a ...

crank sensor behind the harmonic balancer. I am looking for the shut off relay now. It acts just like one that was tripped. I know! I had a ford escort and since I live on a dirt road a rock popped up

sensor (2 prong plug in front of throttle body on black air intake tubing) had a broken wire, which I soldered back together and plugged back in. After that the car would start and idle well with good

crank sensor. does this have one coil assembly with 6 posts or are there three individual coils? If it has three individual coils try swapping the coil that works with one that doesn't. If the one