2002 Dodge Neon "power steering belt" Questions

...power steering. Can the tensioner cause this? If the belt came off/broken you will have no power steering. If the fluid is low/empty you will have no power steering. If the tensioner is not keeping ...

...power steering pump, not alternator, is no longer turning making it hard for me to turn the steering wheel. can you tell me which pulley do i need the power steering pulley or the performance pulley, ...

...power steering pump belt affect my timing my power steering belt is about to break and its with the crankshaft will my timing jump off. it it broke. The timing belt & accy drive belt, are two ...

...power steering iseffected and a loud screech? But not when the car not running (blower motor works) I think it is the ac condencer? you need to replace the serpentine belt and perhaps the belt ...

power steering belt came off. how do i put it back on? How does it just come off? Did it break? And if it did you need to loosen up the power steering pump and slide the belt on and then tighten the ...

power steering went out. They told me I needed a belt tensioner ,belt and a pulley they would gather their prices and i would do the same. They havent called so I am trying to find the parts on my own

power steering not working on 2002 Dodge Neon My AC was not working on my 2002 Dodge Neon and now my power steering is gone. Is this likely a belt issue and is there one belt for both the AC and power

...power steering pump,is slipping.When it slips,you loose the power steering effect and it makes it hard to turn.It will slip under load.i.e when turning.Check the fluid level and belt.Replace belt if ...

power steering pump loose or broken? You mention replacing the tensioner, so I'm guessing the belt is too loose. If it isn't spinning the power steering pump, the steering would be very difficult. The

...power steering accessory and A/C compressor drive belt. 1. Loosen the power steering pump locking bolts A and B and pivot bolt C(Illustration 1 and 2 ) to allow adjustment of belt tension. 2. Using a ...