2001 Dodge Stratus "timing align" Questions

...timing belt then the marks are on the cams and crank. align the slots on the very edge of the cam wheels they will meet in the middle. on the crank there should be a weird shaped v on the plate ...

rear wheels on a 2001 dodge stratus rt are squeking and wearing out,could it be that the rear wheels need alignment? Yes, it could be alignment, it could also be wheel bearing's, have it check out, at

just replaced timing belt on 99 stratus, now it will not start, cranks but will not start...anything??? recheck to be certain it is aligned properly,. fortunately for you this is a non-interference ...

Sudden release of power while driving at 65 miles Hi I got my 04 dodge status wheels aligned and brakes checked couple of days back. Yesterday while driving the car I notices jerks of loss of power ...

...timing without being able to turn crank and cams at the same time to align. Do you remove cams or just turn to align???? remove the #1 sparkplug place a long screwdriver in the sparkplug hole point ...

need for 2002 dodge stratus 2.7 timing chain diagram online Remove the timing belt. Crankshaft and camshaft timing marks-2.4L engine Timing belt tensioner-2.4L engine Camshaft sprocket alignment-2.4L ...

...the CPS plate to crank aligned the oil pump marks to engine marks, then aligned cam shaft to timing marks and installed the timing belt, installed compressed automatic tensioner, tightened ...

I have changed the timing belt on a 99 Dodge Stratus with a 2.4 liter engine. All timing marks are aligned properly according to Haynes diagram and the engine will still not start. It tries to start ...

just change timing belt on 98 dodge stratus 2.4l getting code of camshaft sensor malfunction could it be that timing is off Who replaced the timing belt? The timing could be off cause timing marks ...

I need the timing mark alignments for a 2005 dodge stratus It doesn't have timing marks as the timing cannot be adjusted. The timing on the Stratus is computer controlled via the cam and the crank ...