...P1698 is: No CCD messages from TCM. That means the communication between the Transmission Control Module and the Power Control Module is lost. Sometimes this happens when a PCM, or TCM is replaced ...
P1698 code TCM and PCM not comunicating I have a 1998 dodge stratus 2.4 liter and have replaced the input and out put speed sensors. Engine light went off but now I have a p1698 code is on. Car is ...
...PCM to turn on the Check engine light you must now have the dealer scan the TCM for more codes to resolve the problem.P1698 DODGE - DTC Detected in Companion JTEC Module, These codes are related and ...
Question about Dodge Caravan
...p1698 no ccd/J1850 mess from tcm/pcm Try clearing the codes, then restart, see what codes still come up. To manually clear the codes disconnect the neg battery post, leave off for 10 minutes, ...
...p1698 no ccd/J1850 mess from tcm/pcm car is runnig really rough like it is miss fireing,just replaced the ecm ,check engnie on and is showing those codes Google the codes Too much to read & ...
...PCM IS NOT GETTING ANY SIGNAL FROM TCM THANKS JERRY. P1698 = DRB display of: No CCD Messages from the TCM (Transmission Control Module) = No messages received from the TCM. Basically the Transmission ...
...p1698 on caravan 97 3.8 after replacing radiator,then had code for cam shaft positioning sensor and throttle positioning sensor also removed thermostate and hard wired the fan and believe i had the ...
...p1698 means the pcm is not recieving a bus message from the tcm. The vehicle bus is a wire that runs to each module as there means of communication. This could be a broken wire, bad connection, or ...
...p1698 came up i checked the pcm and tcm connections and added electrical grease i need to know where the speed sensor is located the ones i see do not look like the pictures in the parts catalogs Hi ...
1,334 questions posted
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions