Question about Dodge Stratus
...2,4 L engine DOHC Easy! The DIS module has failed...! The Stratus 2.4L engine uses what is called "a wasted spark" ignition system, that feeds two cylinders with the same ignition coil. Havind a pair ...
Question about Dodge Stratus
...2.4 dohc will the coil pack spark if the valves are bent on the number 2 and 3 cylinders If the engine cranks, and the cam and crank are close to being in time, the coils should fire. You just would ...
...SP FWD L4 2.0L/2.4L V6 2.5L 41TE A604 STRATUS 01-03 4 SP FWD L4 2.0L/2.4L DOHC 41TE A604 STRATUS 01-03 4 SP FWD L4 2.4L SOHC F4A42-2 STRATUS 01-03 4 SP FWD V6 3.0L F4A51-2 From: txchange ...
...2.4L DOHC, 2.7L DOHC, and the 3.0L SOHC Engine Diagrams. http://www.2carpros.com/car_repair_information/year/2001/make/dodge/model/stratus/2001_dodge_stratus_timing_belt_diagram_marks.htm That's how ...
...2.7 DOHC engine Need Diagram /Video The tension pulley is the one that is not driving anything, and has a large spring assemble attached. At the centre on the (cllosed) side there should be a 1/2" ...
...2.4L DOHC engine, (which I will assume you have) has 2 functions, one is to send temperature to dash gauge, the other is to send signal to PCM . That signal changes when cold, which results in PCM ...
...2.4lt engine I am assuming your Stratus is a Sedan with the DOHC 4-cylinder engine. If so this might help. Do you know where your PCV valve is? (The PCV valve is on the driver-side of the engine up ...
...2.4 DOHC. I believe for your engine the cams are set up on the back (drivers side) of the cams. There are flat spots on the cams that have to be level with each other. I eye ball them. But there is a ...
...2 through No. 5 and right side No. 6. Tighten the M6 fasteners to 105 inch lbs. (12 Nm) in the correct sequence. Fig. Fig. 3: Camshaft bearing cap tightening sequence-DOHC engines Fig. Fig. 4: ...
1,140 questions posted
Usually answered in minutes!
1,417 Questions
1,121 Questions
924 Questions
621 Questions
528 Questions
