2000 Dodge Neon "fail warm" Questions

P1299 has trouble starting when engine gets warmed up The code means the computer thinks the engine has overheated based on the reading from the engine temp sensor. The engine could have overheated, ...

...1st gear?????? HI, when the transmission heats up the solenoids stick and sets the transmission in fail safe mode common issue with Chrysler transmission. I would recommn\end your local transmission ...

...you mean engine will not turn over, or does engine turn and refuses to fire. If I had to guess failing fuel pump, they tend not to build fuel pressure when ran a while(warmed up) and when left

...this? hi every car has a speedo meter cable in tat a worm gear attached in the wheel so i case of fails the speedo meter works some time and nt work . so u hav to change the speedo meter warm gear ...

fail at the same time. however it is possible. lastly is electrical to both fans has failed...put a tester into the connector (not into the fan) and start the car....let it warm up...as it get too hot

...(like metal to metal) while the engine shakes violently. This seems to sometimes cause the car to fail to start on the first try. After the car does start and warms up there are no longer any ...

Temp gauge pegging out, but engine isn't hot to the touch. Engine appears to be cool (gauge pegs out before the car fully warms up), upper radiator hose doesn't appear to have much ...

...of 12 volts being applied to the compressor clutch because the a/c compressor fuse or relay has failed, preventing the clutch from engaging the compressor, or the compressor clutch itself

...sound a bit clattery. Its normal and does no harm. Only become concerned with such noises when they fail to go away once warmed ...

...doesn't make sense. I also heard of fuel pump not giving enough head pressure and then injectors fail. Any help in diagnosing this would be very welcome. Matt Wilson Had similar problem with 97 ...