1997 dodge caravan i have changed the coil, cam sensor checked for volt to the sensors ande coil pack all have there rated volts next i'm going to change the crank sensor to see if that is it ????????
1997 Dodge caravan crank position sensor Where is the crank position sensor located in a 1997 Dodge Caravan? it is located on the bellhousing of the transmission it gets its signal from the ...
crank shaft sensor will not start changed the crank shaft sensor still nothing injectors wont go to and no spark any ideas please It could be a computer malfunction or a circuit in the ignition switch
sensor. Crank the engine and check for the code again. If the logic module saw a signal, the code will be cleared. This code will not show up if the sensor simply fails. The logic module must be reset
Question about Dodge Caravan
...1997 Dodge Caravan that won't start it has a tick tick sound. The interior lights do come on. I don't drive the car every day. I tried to jump start it but that did nothing. I decided to see if I ...
...1997 grand caravan hesitates when accelerating. changed crank shaft sensor . no check engine light on have you checked the fuel injector? if enough fuel is not getting through when accelerating it ...
crank sencor location where is it locataed at? The Crank sensor is located on the transmission housing near the top at the back of the engine.
CRANK SENSOR AND CUT OFF RELAY AND COMPUTER.CLEAR CODE AND DRIVES FOR DAY OR TWO THEN WONT START COLD AND CODE 54 IS BACK. ok, any obd code means the sensor concerned is not detected by the ecu, or is
where is located the crank sensor the Dodge Caravan 3.3 year 1997 CRANKSHAFT SENSOR LOCATED ON THE UPPER PART OF THE TRANSAXLE BELLHOUSING ABOVE THE DIFFERENTIAL.
1,644 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: