...crankshaft sprocket to TDC to take up the belt slack.Install the tensioner to the engine block, but do not tighten.Using a torque wrench on the tensioner pulley apply 250 inch lbs. (28 Nm) of tighten ...
...crankshaft until number one piston is at top of compression stroke. Rotate rotor to No. 1 rotor terminal. Lower distributor into opening, engaging distributor drive with drive on camshaft. With ...
...Torque settings for Crankshaft & Cylinder Hrad Hi I have a Opel Corsa utility 1.7D I am doing the hole engine over but I need the setting for it 2000modle Corsa and the engineers are rebuilding the ...
crankshaft turns smoothly. Connecting rod cap bolts torque: Torque: 24.5 N·m (250 kgf·cm, 18 ft·lbf) Mark the front of the main bearing cap bolt with paint. Re tighten the main bearing cap bolts by 90
torque spec for 1993 stealth RT front crankshaft pulley bolt There is a large bolt which is used to attach the harmonic balancer to the crankshaft on a 1993 Dodge Stealth DOHC (non-turbo) . The RT ...
...setting other than what is in the book? look for timing marks???? Align groove of crankshaft timing pulley with mark on oil pump. Align the marks on the camshaft timing pulleys with the corresponding ...
...torque.Crankshaft Torque SpecsThe stock rod bolts have 46 lb.-feet of torque and the ARP rod bolts have 50 lb.-feet of torque. The crankshaft pulley has 116 lb.-feet of torque, while the ...
Question about Mazda Cars & Trucks
...torque settings for the crankshaft main and big end bolts for the E2200 R2 engine without more information, such as the year of the engine or the vehicle it's installed in. The torque settings can ...
...torque settings for crankshaft 1.6 16 valve ...
...Fit cranckshaft pully. Tighten crankshaft pully bolts 8. G4-J: Tightening torque: 12-15Nm. G4-N/G4-k: Tightening torque: 10-12Nm G4EA: Tighten crankshaft pully bolt 9. Tighten torque:
436 questions posted
Usually answered in minutes!
1,417 Questions
1,121 Questions
924 Questions
772 Questions
621 Questions