1996 Dodge Stratus "camshaft sprocket timing alignment pins" Questions

...camshaft sprocket alignment for timing belt installation Install the crankshaft sprocket. Set the crankshaft sprocket to Top Dead Center (TDC) by aligning the notch on the sprocket with the arrow on ...

...camshaft sprocket's timing dowel pin holes align with the timing chain housing holes. The crankshaft sprocket mark should align with the engine mark. The crankshaft sprocket keyway should point ...

...Camshaft sprocket timing alignment pins. J-39579, Camshaft sprocket wrench. CAUTIONS: The timing chain on the 1996 LD9 (VIN T) Twin Cam Engine is not to be replaced with the timing chain from any ...

...camshaft sprocket bolts, using a 7⁄8 in. (21mm) wrench to hold the camshaft. Then remove the timing chain and camshaft sprocket. Remove the crankshaft sprocket, if necessary. To install: ...

...camshaft sprocket's timing dowel pin holes align with the timing chain housing holes. The crankshaft sprocket mark should align with the engine mark. The crankshaft sprocket keyway should point ...

...camshaft sprocket timing dowel pin holes line up with the holes in the timing chain housing. The crankshaft sprocket keyway should point upwards and line up with the centerline of the cylinder bores. ...

...camshaft sprocket bolt, using a 7 / 8 in. (21mm) wrench to hold the camshaft. Then remove the timing chain and camshaft sprocket. Remove the crankshaft sprocket, if necessary. To install: Inspect the ...

...camshaft sprocket. If necessary remove the camshaft sprocket, then slide the camshaft sprocket into position with the chain already engaged. The timing chain should be positioned so that one silver ...

camshaft sprocket with the notch on the timing belt cover. When the single timing mark on the right exhaust camshaft sprocket is aligned with the notch on the timing belt cover, ensure that the double

...camshaft sprocket timing dowel pin holes line up with timing chain housing holes, Fig. 1. 6. Remove timing chain guides. 7. Raise and support vehicle with jack stands. 8. Ensure timing chain slack is ...