1996 Dodge Stratus "belt drives water pump" Questions

...belt cover to access the water pump. Remove the water pump attaching bolts. Remove the water pump. Fig. 1: Water pump location on the cylinder block-4-cylinder engines Fig. 2: Water pump ...

water pump,the timing chain got misaligned.It has to be inspected.Most probably,it needs to be replaced.Below is the master help link provided to go through belt routing diagram:--

...water pump? Does the belt squeak? i dont think its the water pump. sounds like somethings blocking the coolant flow. possibly the radiator or thermostat. if you have the 2.7 engine the water pump is ...

...Water Pump Belt for 1992 Oldsmobile ? http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html --------- How to replace Water Pump on Car ? ...

water pumo is located behind the timing belt cover youll have to remove the timing belt to replace it. The 2.4 engine is similar to the 2.0 Neon motor. It wasn't a quick and easy job but doable if

...belt. - Remove hose that connects water pump to radiator. - Unbolt and remove fan (if attached to water pump). - Unbolt and remove water pump. Clean up the mating surfaces, install new gasket and new ...

...belt as well because it drives the water pump, and it's likely the belt is due for a change especially after coolant has soaked it. If you're not familiar with camshaft timing etc. you may ...

...belt. Step 7 * Remove any hoses connected to water pump. Step 8 * Unbolt water pump from engine. Remove the water pump. Step 9 * Using a gasket scraper, clean the mating surface on the engine block. ...

Is there anyway I can relpace water pump without having to reset the timing on 2006 Dodge Stratus? no as the belt drives the pump. do the job the right way and you won`t have any problems after.

water pump when changing the timing belt. The belt may last for 200,000 miles, who knows? The problem is if the belt breaks when the engine is running, there could be serious internal engine damage. I