1993 Dodge Dakota "sensor" Questions

were is the crankshaft position sensor located on a 2003 dodge dakota with a 4.7l engin ANSWER: CRANKSHAFT POSITION SENSOR - 4.7L V-8 ENGINE REMOVAL The Crankshaft Position (CKP) sensor is located at ...

WONT MOVE UNTIL YOUR GOING ABOUT 30 MPH. WHATS THE PROBLEM This is most likely the rear wheel speed sensor, which is located on top of the differential housing. Mopar part number is 05032220AA and is

o2 sensor bad, when I have auto zone hook up and test they do show o2 sensor bad, but the codes are saying sensor 3 and 4 are bad. it doesn't say "bank 1 sensor 2". how do I know what ...

WHAT DOES P0123 MEAN? SYMPTOM P0123-THROTTLE POSITION SENSOR VOLTAGE HIGH WHEN MONITORED With the ignition ON and battery voltage above 10.4 volts . SET CONDITION Throttle Position Sensor voltage at ...

what dose the crank sensor look like and where dose it go on a 99 dodge dokota Please don't forget to rate! Remove the air cleaner assembly if necessary for access to the sensor. Disconnect the ...

have code p1391 and p0340, replaced both sensors and still have same problem. lots of backfiring and hesitation and raw gas out the tail pipe. Put oscilloscope on crank and cam sensor signals. loosing

2007 3.5 dodge Dakota rpm sensor where is it located to replace Not sure what you mean by rpm sensor. The signal for the tachometer comes from the PCM and is based on signals from the crankshaft ...

What is the sensor on the back of the motor called crank sensor maybe the crank sensor its on the back of motor on the passenger side I is most lickly a cam sensor or a oil presur sensor need a ...

i have a 2000 dodge dakota and i bought a universal h20 sensor and i need to know what the wireing digram for the sensor is the colors on the truck are orange/green and yellow/white and black/blue and

Oxygen Sensor I have a 3.9L 1997 Dodge Dakota and my check engine light came on and I got it scanned. The code came out as an Oxygen Sensor 1 in Bank 1. Where is this sensor located on my truck? Bank ...