...coils going bad, and the electronic ignition control modules - for which there is a testing procedure - (any Haynes manual will tell you, I believe) - as well as a test procedure for the coil (Ohm ...
How can you tell if relays in fuse panel are good They can be tested if pulled out. Know how a relay works? Relays have a power side and a coil side. When the coil side is energized from voltage ...
...test the coils from the underside of the coilpack with a dvom. having said that your car should still start if one paired coil fails, it would however miss on one or two cylinders. I would suggest to ...
...three in different cars in the last 2 years and in each case fixed my problem. If you have a test lamp or meter, check that you have voltage coming to the coil, and if so, swap in a known good ...
...test the ignition coils by connecting an ohmmeter between the coil towers ie 1and 4 with the key in the OFF position do the same with the others as well there are 3 coils all together...you should ...
No spark from coil1/4 Runs but no spark coming from #1/#4 coil. remove coil 1/4 with anoid light test module at coil pin it's usually the module is defect hope it helps
...this car but if I was you I would start with the ignition system. First getting extra spark plug or tests light. When the car is running good, pull the coil or spark plug wire off and test for spark. ...
93 buick regal grand sport hey, i had my 93 buick regal gs died while driving it the other day. the service engine lite was on that morning. i have changed the coil pack o2 sencer had the piece under ...
Stuck intake or exhaust valve, or blown head gasket allowing coolant into cylinder #1. Use a spark tester to check the spark coming out of cylindr #1 if checks good then ohm test the injector when it
1,447 questions posted
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
779 Questions