box thought. Possibly the intake manifold plenum has cracked allowing more air to enter the combustion chamber causing the "vacuum leak" symptom of a lean condition. Often times, a leaking plenum will
cant locate the ecu/ecm relay on a 2006 vw passat 2.0 UNDER THE COVER OF THE PLENUM CHAMBER INSIDE THE BLACK BOX AT DRIVERS SIDE.
ecm relay location INSIDE THE BLUE BOX INSIDE THE PLENUM CHAMBER AT DRIVERS SIDE.....
Question about Cars & Trucks
...transmission at the rear of the case underneath the end cover. The Transmission Control Module is located in an E-Box in the plenum chamber on the driver-s side below the Engine Control Module
...plenum chamber top. 13. Remove the blend door assembly from the case. 14. Remove the heater core. 15. The installation is the reverse of the removal. The heater core should be encased in a box up ...
...box to the plenum. Unplug the vacuum line located on top of the black tube. This simply pops in and out so you might need to be forceful, but apply common sense since it's a plastic vacuum line. ...
Question about Dodge Cars & Trucks
...Box in the plenum chamber on the driver-s side below the Engine Control Module (ECM). ...
...box which is located in the plenum chamber beside the brake master cylinder and reservoir! On the passenger side end of the dashboard is a second fusebox if the equipment level is high enough! yes!! ...
...box door tabs and lower it SRS module?s electrical connector SRS module-to-instrument panel bolts and the module Remove the instrument panel by removing or disconnecting the following: Speed control ...
...inside the transmission at the rear of the case underneath the end cover. For a 5-speed it's located in an E-Box in the plenum chamber on the driver-s side below the Engine Control Module
1,447 questions posted
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
779 Questions