1998 Buick Century "goe change lower control bushings" Questions

...change the lower control arm bushing on a 1998 Buick Century? I printed out the detailed dealer directions from the public library and it says I need to remove the whole lower control arm. Is this ...

...bushes. John check mounts motor,and trans I had a similar problem. my car was pulling to the right or left when I acceletated. The solution was to replace the lower arm controllers with bad

...change the springs on the rear the shocks on the rear tire on the rear still rides shaky over bump.im wondering the only thing left is rear control arms upper and lower anyone thinks that will fix ...

...ball joints, tie rod ends, steering dampener (if equipped), upper and lower control arm bushings, hub bearings. I would also have the U-joints and motor mounts inspected in the

...lower control arm down far enough get the assembly out to compress the spring to change the shock.The center nut on the top of shock has pressure on it from the spring so do not remove that one til ...

lower control arm bushing at the rear of the control arm.It is a horizontal bushing retained by a vertical bolt clamping it to frame.The tire will move more forward and back more than it should during

...change it. Scrapyard parts are inexpensive and generally fairly reliable as replacements. whees r out of ballance take it to a tyre place and get them ballanced have your front tires balanced also ...

lower control arms have bushings in them that wear out with time/miles. When they wear out your alignment also goes out of whack and you'll eat tires up. If you see cupping or uneven wear in the front

...lower control arm bushings. Creak! 6. Ball Joints. These sound like an orchestra when going up a driveway. The most expensive fix on these cars. Up to 1800.00 dealer cost. They do not press out the ...

...Lower Control Arms the bushing were shot, Stabilizer Bar End Links, Front Strut Assemblies, Front Wheel Hubs/Bearings. What ever tire hits the bump first is the way the car goes. I am at a loss at ...