1997 Buick LeSabre "remove bottom pulley bolt stuck" Questions

Ad

...remove the bottom bolt. The PS pump will loosen up enough so that you can push it towards the firewall and you will JUST have enough room to remove the waterpump bolts. Its tight but it will squeeze ...

Ad

Question about Buick LeSabre

1 Answer

...remove the mount. 1980's models have all the engine mounts at the bottom, and 2000 and later models have the front mount bolted to the cast aluminum oil pan. Besides a new water pump and gasket, you ...

Ad

...bottom and might require going underneath the vehicle. Remove belt first, drain coolant then I always buy the new one next. That way you can see where the mounting bolts are. Remove bolts and pump ...

...remove cam belt. now the tricky part. Replace the bottom crack pulley. turn so that the marks are lining up. the cam pulley has got a small hole in turn the hole upward to the top of engine. there is ...

Question about Buick LeSabre

4 Answers

...remove it anyway if there's any doubt all water pumps have a "Weep" hole in the bottom front, if water's coming out there the pump's gone mind wwhen you pull the pump you drain almost all the water, ...

...remove the pulley? You mean the serpentine belt, The timing belt is under the timing covers and is a bigger job. You would be asking different questions if you were in there. The tensioner, there are ...

Question about Buick LeSabre

2 Answers

...bottom pully bolt turn to loosen it on honda accord 1992 Anti clockwise (Counter clockwise) to loosen, but be warned, it is tight, it is very tight, and will require very heavy duty drives to loosen ...

Question about Buick LeSabre

1 Answer

...remove the alternator terminal nut as well as the wire from the terminal itself. Loosen the adjusting bolt and the alternator nut, both of which are found on the bottom side of the alternator, below ...

Question about Buick LeSabre

3 Answers

you remove hose or you can drain coolant from drain plug on bottom of radiator, then remove heater hose to pump, now remove bolts holding pump on and pump will come off.good luck, hope this is helpful

...bottom of engine. Connected to the coil pack modules. (An afterthought) Loosen crankshaft pulley bolt. See step 8-9. Remove battery and battery tray. Remove front engine strut brace and bracket. ...

Not finding what you are looking for?
1997 Buick LeSabre Logo

2,358 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

1992 Buick LeSabre
1992 Buick LeSabre

779 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...