2004 Mitsubishi Endeavor "radio works hold eject button" Questions

...it works. Error 3/E-03 is a mechanical malfunction of the CD loading mechanism. There is no do-it-yourself repair for this failure, it will need to be sent to a radio service for repair, or

...radio works and you press mode .Does head unit recognize cd,s It should display no cd,s cd error etc The reason i ask this is to confirm that connection is ok to stacker To eject PRESS AND HOLD eject ...

...radio station. Can only reduce/increase volume, cannot turn off. - Cannot access the Navigation. - Cannot make/initiate calls through bluetooth, but can answer incoming calls (answer on phone) and ...

...pressing and holding the 'eject' button to 'eject all' but all I get is a beep and nothing else. The radio and weather radio work normally. Ideas? you will have to un jam the changer please rate ...

...radio. BUT, can't eject CD. There is no pin hole anywhere near the CD slot that I can find to manually eject the CD. Help! We have tried several of the solutions offered. (i.e. holding eject button ...

radio's have one. If you do locate it press and hold for like 10 seconds. Or look in the owners manual if the radio has a reset button 5. Really? Go to the fuse box near drivers door dash and pull the

...radio off, then hold the reset button for 5 seconds. Just bought an 05 Lesabre and been trying to figure this out for a week, just accidentally figured it out. Hope other people find this useful in ...

...radio and clock work fine but it's like it does not even know there is a cd player in the car. every 30 seconds the motor runs that sound slike its trying to change a cd in the player. I take it the ...

...radio and pulled off the cover on top of the CD changer. I removed the two screws that hold the frame around the CD changer. I turned the CD back on and the CD went through a test on each CD. I know ...

...radio station. Depressing the eject button on the changer in my trunk does nothing but make a short spinning noise as though it's trying to eject but does not. Also, I tried disconnecting then ...