2002 Mitsubishi Lancer "remove glove box jeep" Questions

...glove box must be removed. It is removed by slipping the glove box strap off the hook and letting the door roll down off its hinges. To reinstall, position the glove box door at an 8 o?clock ...

...explain how remove the glove box cant find the releases to remove the glove box Hi there:Twisting motion to start since there are 3 hinges that hold it, (up down up). Other details HERE. Good

...The cabin filter is right beneath the glove box on the passenger side of the car under the dashboard. open the glove box and remove a few screws and the filter wil be visible. Remove and

remove the glove box by opening it then prying the two tabs at the top on both sides so it opens farther then normal then remove it from the hinge. next just unplug the resistor and remove the two 8mm

...remove the glove box on a 2005 Jeep Grand Cherokee? I forget when they changed body styles, but if your is still a WJ body, you pull the glove box out halfway, the reach under the dash lip, there are ...

...relay. it is located inside the vehicle on the passenger side under the glove box. You will have to remove the cover under the glove box and you will find it there. Should take about 30 to replace

...your glove box door and the whole thing should pop right off the hinges. Behind that you'll see where your resistor plugs in against the fire wall. Remove the two bolts and swap out for the new

...glove box and remove the three screws in the front on the bottom. Take the plastic cover out and you'll see a bank of relays. The horn relay is the one on the far left, closest to you. If they didn't ...

...Remove the glove box door strap and remove the glove box door by letting it drop towards the floor while supporting the door and it will release from the dash. Then you will see the blower motor ...

...glove box 1st). the resistor is towards the right. There was a red locking clip on the bottom, getting this to come out was the biggest problem, it does NOT come off, just out. then remove the cable ...