1988 Mitsubishi Mighty Max "fit alternator drive fan belt" Questions

...drive belt # 15380 for $5.00  or a Duralast belt # 15380 for $10.00...  Route it around the Crank Shaft pully, to the Water pump pully and the Alternator pully adjust the belt tension ...

...alternator toward the engine. Remove the drive belt. 4 Loosen the adjustment bolt for the air conditioning compressor, and slide the compressor toward the engine. Remove the drive belt. 5 Loosen the ...

...car would actual even run without the serpentine (or also called accessory belt) since the belt only drives fairly non essential components (AC compressor, alternator, fan, power steering pump.

...alternator. Size of belt is 17x1000 and its a tight fit onto pulleys so it makes you think its wrong belt, but trust me its not. As if you get 17x1025 or 17x1050 belt you wont get it tight correctly ...

...Fan Hub which was press fit to the Water Pump Shaft. With the advent of Transverse Mounted Engines the Water Pump is still located on the end of the Engine.  The Radiator is located out in Front ...

...Fit the new alternator onto its bracket then insert the mounting bolts. Tighten the right bolt to 18 foot-pounds of torque then tighten the left bolt to 37 foot-pounds of torque. Route the accessory ...

...fit in a square on the arm of the pulley pull or push down or up to release the tension on the belt but make sure the belt pattern in on the fan shroud if the car has never been wrecked make notes on ...

fit a fan belt to a mercedes vito 112 cd1 high i have a 2002 merc vito. there is exaust fumes coming through the air vents when moving. i have to keep the air circualting with in the cabin to stop it,

...alternator the fan belt began screeching. when i returned to garage they were too busy to fix problem .as i drove home the radiator overheated and burst. is this because the fan belt runs the water ...

...alternator Put an 18mm, or whatever size is correct, socket on 1/2" drive bar, or ratchet , and put it securely on nut in center of tensioner pulley. Standing in front of car, you need to pull it ...