1988 Mitsubishi Mighty Max "banjo fitting" Questions

...each banjo fitting unless the bolt has a reduced section so that oil from the one hole can easily get to both banjo fittings which I doubt as that would make lining up the banjo faces near ...

en/banjo-bolts-1-way-metric-din-7643-version-a/8910300 That one is of course a metric fitting, but you really only need to order new metal seal washers for them unless the fittings are lost or damaged

...fitting, this is to guarantee a good seal as you do not want to overtighten a banjo bolt. They are hollow and will snap off fairly easily. Most banjo bolts will only tighten to about 35-45 inch

I have a leaking banjo fitting on vw t5 transporter steering pump. can i replace the washers? or could i risk damaging the unit? YOU CAN REPLACE THE BANJO WASHERS IF THEY ARE LEAKING.

...banjo fitting bolts to 25 ft. lbs. (33 Nm). On 2.2L and 3.0L engines you may have to reconnect the engine wire harness bracket and power steering feed hose clamp. Connect the negative battery cable, ...

...be called on a 01 hyundai tiburon You'll need to get it from the dealer, but this style of bolt is called a "banjo bolt" because the fitting that it goes through kind of looks like a

Im trying to find a replacement for a banjo bolt that attaches the brake hose to the brake caliper on the front driver side for a 2002 Chevrolet Tracker will another year fit Napa has several banjo ...

banjo style test fitting that will replace the banjo bolt that holds the fuel line to either the fuel filter or the fuel rail. you will then be able to attach a pressure gauge to the fitting and check

...their is a banjo type fitting on the back of the head. is that an oil line? No, that banjo fitting should be a fuel reurn to tank and pump from the head. Your oil leak may be a valve cover

...banjo fitting bolts to 20 ft. lbs. (27 Nm). Start the vehicle and check for leaks. Fig. Fig. 1: Disconnecting the fuel lines from the fuel filter Fig. Fig. 2: Fuel filter replacement-1991-93 Integra ...