2006 Chevrolet Uplander "replace rear turn signal bulb" Questions

...rear right. replace the right rear bulb. the quick flashing indicates a bad bulb. it could be a wiring problem to the rear for the signal light that you will have to check out starting at the socket ...

...(H11LL) Front Turn Signal: 4157NAK amber color Corner marker lamp: 194FH4 clear Rear: Brake/turn light: 4157LL (clear lamp) Lower back up light and top running light: 3057XX (Wagner) (clear

rear of the turn signal. Below is a cut and past from my how to lights document for this. You can pull from this what you need to remove the headlight assemby. Bulb types are also listed at the end. I

...4157NAK amber color Corner marker lamp: 194FH4 clear Rear: Brake/turn light: 4157LL (clear lamp) Lower back up light and top running light: 3057XX (Wagner) (clear lamp) I hope this works for

...rear brake/signal is out, I have changed the bulb 3 times in the same day and yet it still isn't working.....any suggestions? Hi,if it keeps blowing bulbs it could be the serciut board that the bulb ...

...replace front turn signal bulb I have written up a proceedure for my 2005. It should still work for a 2007. I also have a bulb list at the end. Your owners manual also gives a good discription on how ...

...rear turn signal bulb for replacement in a 2006 Uplander? Is it the screws that need a hex key or the screws on the very inside next to the speakers? I have a proceedue and bulb list ready for this ...

...replace when "service parking light" message is displayed? That's a new one. I have a 2005 van and never seen that message. Are all the lights working on the exterior of your vehicle? I ...

replace both the rear brake/signal bulbs (bulb number 4135) Your auto part store person can look up the correct number for the bulb brand you choose for the van. Since all the bulbs are about the same

Uplander 2008, everytime that the headlights are on, my left rear turn signal goes off, I already check the bulb and changed and still doing the same. Probably need to replace the multifunction switch