2006 Chevrolet Cobalt "center high mount stop lamp" Questions

...center high-mounted stop lamp( CHMSL). The stop lamp switch get its power from the Body Control Module (BCM). This power is also fused but is internal to the BCM. You need to check carefully the ...

...center high mounted stop lamp (CHMSL). The left and right stop lamp along with the CHMSL are grounded at G302. Do you know about the right insturment panel fuse box ? Stop Lamps Inoperative Step ...

...center high-mount stop lamp cover to disengage the retaining tabs. Unfasten the lamp retaining screws. Remove the sockets using a suitable prybar to release the retaining tabs. Detach the bulbs from ...

...center bolt 3. Remove the spoiler to liftgate bolts (3) 4. Disconnect the stop lamp harness 5. Disconnect the rear washer hose 6. Lift the spoiler to disengage the locating retainers and remove the ...

...center high mount stop lamps , wiring etc.... Causing problem inside the BCM . Do you know what wiring diagrams are ? Free one's here http://www.bbbind.com/free-tsb Enter vehicle info. year , make , ...

...center high-mount stop lamp cover to disengage the retaining tabs. Unfasten the lamp retaining screws. Remove the sockets using a suitable prybar to release the retaining tabs. Detach the bulbs from ...

... The BCM then supplies battery positive voltage to both left and right stop lamp assemblies and to the center high mounted stop lamp (CHMSL). Which one isn't working ? Left - right or center high ...

center high mounted stop lamp (CHMSL). The CHMSL is grounded at G301. The left stop lamp is grounded at G401 and the right stop lamp is grounded at G402. Fuse Block - Center Console Inside of console,

...center high-mount stop lamp cover to disengage the retaining tabs. Unfasten the lamp retaining screws. Remove the sockets using a suitable prybar to release the retaining tabs. Detach the bulbs from ...

...Center High Mount Stop Lamp Remove the screws securing the lamp cover. Remove the mounting nuts, then unplug the electrical harness to the lamp assembly. The lamp now should come out. To install: ...