2005 Chevrolet Impala "icmed test" Questions

2004 chevy impala start car runs about10 minutes then stalls new fuel pump when stalls cut out like running out of gas then don't start till cools off if electical to me would cut out instantly help ...

where can I find the 2005 chevy coil packs module wiring schematics at here online nothing came up what I need to see. can you help me. This is one special car with the 3800 v6 engine . wont start not

'91 Ford Econoline - No spark still. Found no voltage from pin 2 ICM harness and consequently no voltage pulse at neg ig. coil terminal. ICM ohms tested good, ig. coil tested good. Other voltage tests

1992 olds delta 88 royale cranks but will not start looks like there is no power going to crank sensor from the ICM but I have power going to the ICM. I put the ICM on a different car and it works ...

89 K1500 ICM How can i test if my ICM It works for My 89 chevy k1500.. That info is on the internet & may be on You Tube Video as well Just have to Google the question I have seen it on the net ...

what should a multimeter read on a continuity test on the coil packs? i'm getting 1.9,1.7,1.7 The multimeter can read the resistance and if it is not open or shorted out, I'd say that your readings ...

Hooked up battery backwards on my 95 Isuzu. Ok so i fried 100amp main ignition fuse. Truck wudnt crank. Replaced fuse and got truck to crank but wud not run. Did research. Tested ICM (read that 99% of

i have a 1996 c1500 with a 305 it will start and run for about 3 mins than start running rough and then shut off.you have to wait about an hour before it will start again Replace the fuel filter first

One of my 3 coils is not getting spark but Icm tests good and coil is good 98 Camaro 3.8th what do I check next 98 Camara 3.8l. So I am not getting any spark out of one of my ignition control modules.

1998 blazer 4.3l crank but no spark condition 1998 blazer 4.3l engine. old engine started knocking. Replaced with a 4.3 out of a 98 blazer that had been rearended. Engine is hooked up. I have a Crank ...