s10 truck it still wont hold pressure so I cant shift. I suspect its the master cylinder thats connected to the clutch pedal? How do I remove it so I can replace it? there should be two bolts/nut that
...S10 4.6L 2WD Ext Cab truck. Just replaced the transmission and have bled the system. I started the engine and I cannot shift into first gear without grinding the gears. Any suggestions on why this is ...
...remove the screws holding the lower part of the dash together (below the steering column)- I hope this was helpful, I ran into a lot of problems after I swapped an engine and rebuilt the transmission ...
s10 As we bleed the brakes they get hard like they are supposed to do. I don't notice any air coming out though. Then i take it for a test drive they work but the peddle seems to go down as far as the
...s10 s14 s15. 4x4 4.3 v6 Tahoe engine ext cab 5 speed. Anyways I recently replaced the clutch, throw out bearing, clutch fork, slave cylinder and master cylinder and 3 weeks later my truck only works ...
2,062 questions posted
Usually answered in minutes!
904 Questions
790 Questions
747 Questions
686 Questions
620 Questions
