1997 Mitsubishi 3000GT "cost exhaust system put 2000" Questions

Ad

...cost. un plug sensor. un screw two phillips screws, pull it out and put the new one in. thats it. good luck This code means the O2 sensor is showing the fuel control system is biased to lean air fuel ...

Ad

...exhaust gases in the coolant (indicating a blown head gasket). This is a pretty simple test but requires special equipment. It should not be very expensive at a shop. Or you could rent the equipment ...

Ad

Question about Mitsubishi 3000GT

2 Answers

...cost you a new engine if there is no indication of antifreeze in your crank case, then it's a leak somewhere else through out your cooling system. If you see the leak from the out side then that's ...

...exhaust, electrical gremlins, and smog system than the cost of synthetic or additives. So go cheap and go often. If you want to feel good about the oil system, put your money towards a good filter ...

Question about Mitsubishi 3000GT

3 Answers

...exhaust manifolds were loose or broken and they generated a cold start ticking sound that went away after it warmed up. Since than I have seen a lot of this problem on many 6.0s with the mystery ...

Question about Mitsubishi 3000GT

1 Answer

cost anything) Put a $15 NAPA Gold fuel filter on. At eight years you can't go wrong-it should need it anyway. Next step up in price is to have a mechanic attach a pressure gauge to the Schrader valve

...cost. They may be permanently attached to the distributor cap, so it will have to be changed as well. Step3 Replace the distributor cap and rotor if your car has them (some newer models with ...

Question about Mitsubishi 3000GT

1 Answer

...exhaust (loose baffle in the resonator was cut out and welded back in). After examining the systems, the compressor seemed to work (filled the rear and some of the front and at one time all sides ...

Question about Mitsubishi 3000GT

1 Answer

exhaust thing and could not reach the rear plugs. I took it in to a shop and it cost me over 160 bucks for them to do it. Mostly labor. For the first time going through, I would allow yourself about 4

exhaust system not a tip. make sure you have an LSD transmission then pull apart the motor mainly the head change out valves, spring retainers, and springs. new camshafts make sure you buy the springs

Not finding what you are looking for?
1997 Mitsubishi 3000GT Logo

113 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...