1995 Mitsubishi Galant "distributor cap" Questions

...distributor cap. If the cap is worn out it tends not to give current to the plugs. If problem still persist then the problem will be on the distributor coil pack itself. It's the main supply of ...

...distributor cap and still no fire to be more precise,would really need to know the model of engine;4G64,6A11,6A12 etc.should be on vehicle ID badge.the 4 denotes a 4 cylinder,6 is V6,the earlier ...

...distributor cap if moisture gets inside the cap it can cause hard start or misfire either one. Take the distributor cap off and check the metal prongs or just simply check for any moisture or ...

...Distributor Cap and rotor NOTE: if you have a Distributor ,Some are Distributorless. Pull your Spark Plugs out BEFORE you Do Locate #1 Plug its in Front of your Engine.And Trace the Wire to the ...

...out the interior of the distributor cap. ensure that the HT leads are pushed fully home in the cap and on the plugs . clean the distributor outside so the that spark cannot track through the

...distributor cap on a 1999 mitshubishi galant 3.0 engine Here you go. As the firing order is 1-2-3-4-5-6 it is simple. Just connect #1 to the #1 location as noted on the diagram, then to the #1 plug, ...

...two terminals of the distributor. it should be 0.9?1.2 ohms. then measure the resistance between the secondary ignition coil terminal on top of the distributor cap and each of the 2 pins. 20?29K

...distributor cap.Then mark the relationship of the distributor base to engine. Then mark the relationship of the distributor rotor to the distributor.Mark them in a place where it will be easy for you ...

...distributor assembly or just the cap? Sounds like your ignition module is not functioning, it is inside the distributor assembly. With all that expenses, you should gone to the dealer or any ...

my car has problems starting after it rains I'm going to sugest a cracked distributor cap. Hairline cracks seem to atract water.