Question about Mitsubishi Lancer
...inside mechanics. Remove the sheet and you can see the window parts through the holes in the door. You can then remove the window cranking system. You probably are going to end up replacing the
remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.
Question about Mitsubishi Lancer
...door panel will need to be removed,remove all the screws holding panel in place ,then pull panel away from door to release plastic clips once clips release pull the panel upward and panel should come ...
front drivers side door panel 2004 lancer removal This should help:
...remove the heater box. I already have purchased the blend door and the linkage for my son,s 2003 Lancer. I will be doing the job in about a week. I am a professional auto repair tech with 38 years ...
door-will-not.html ----------Toyota 4Runner: Temperature Gauge Sensor http://technoanswers.blogspot.in/2012/04/toyota-4runner-temperature-gauge-sensor.html ------------Temperature gauge sits over half
...at the handle inside, loose. Remove the internal handles, remove the inner door panel and have a look at what's come adrift. Usual issue is the rod from the handle to the door lock has
Question about Mitsubishi Lancer
...remove and there's a door panel removal tool for prying out the plastic clips that hold the panel on (but you could use two flat blade screw drivers and be carefull not to damage the panel). If you ...
...lever. You need to remove the door handel with the panel attached to the door and re-hook the lever. good luck,Gary Did you manage to fix it, if not i can show u on a video what u might need to do
394 questions posted
Usually answered in minutes!
997 Questions
654 Questions
213 Questions
209 Questions
136 Questions