2000 GMC Yukon XL "torque converter install tips" Questions

Ad

...Torque converter access plug 4L60E/4L65E removal Flywheel to torque converter bolts The two bolts securing the transmission rear mount to the transmission The transmission vent hose, fuel lines, and ...

Ad

torque converter IN THE TRANS before installing the tranny? If not you broke the pump in the tranny. Also DO NOT tip a used tranny upsidedown it sends all the clutch and band debres into valve body. I

Ad

Question about GMC Yukon XL

2 Answers

...torque converter a few degrees at a time until it slips in place. do not force it in. Is there a possibility the torque converter is not fully seated, best thing to do is look between the engine and ...

Question about GMC Yukon XL

2 Answers

...torque converter cover. Usually this is just a few small screws and/or small bolts Remove the starter motor mounting bolts. Use care as the starter is relatively heavy. Do not allow it to fall. Take ...

Question about Cars & Trucks

1 Answer

...torque converter clutch circuit performance Hi there:This code is related to the TCC circuit in the transmission. It is either stuck in the closed position (regulator valve, or control valve) or it ...

Question about GMC Yukon XL

1 Answer

...torque converter clutch circuit performance Hi there:This code is related to the TCC circuit in the transmission. It is either stuck in the closed position (regulator valve, or control valve) or it ...

Question about Cars & Trucks

1 Answer

...torque converter. You will need to take it to a reputable transmission shop to have some fluid line pressure tests done. The cost of course will depend on the repair needed. Some parts of the repair ...

Question about GMC Yukon XL

2 Answers

...torque converter and the transmission will need to be replaced. Check and follow this procedure from Honda Service News November 2003 TITLE: A/T DTC P0740, P0741 Repair Tips: Another Look APPLIES TO: ...

torque converter cover and force pry the tabs on the plastic torque converter splash shield to be able to get access to the two hidden starter mounting bolts - then remove the two bolts and remove the

Torque Converter Clutch (TCC) - Stuck On. The DTC P0700 code is for information only and the next step is to check for transaxle codes in the Transaxle Control Module (TCM). So you'll have to have

Not finding what you are looking for?
2000 GMC Yukon XL Logo

295 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...