1999 BMW 318 ti "rotation 90 degrees clockwise" Questions

Ad

rotation, after cylinder #1 intake valve(s) are shut, the cam will continue to rotate 90 degrees and come to rest at a position in which both exhaust and intake valves are at their maximum lash point.

Ad

Question about Cars & Trucks

1 Answer

...90 degrees clockwise. once that's done remove the bushing and then rotate the spring plug 80 degrees clockwise again and it should slide out. there is a tab on the bottom of the spring plug that ...

Ad

...and 6 cylinder is 135624 1-8-4-3-6-5-7-2 Edit: Here's a diagram for all GM V8's of that firing order. Remember to rotate the diagram 90 degrees counter-clockwise because our engines are

...rotation using an angle indicator. Hexagon Head Bearing Cap Sub-Assembly Bolts 1ZZ-FE Engine 18.5 Nm (14 ft.lb) 2ZZ-GE Engine 18 Nm (13 ft.lb) Connecting rod: 1. Apply a light coat of engine oil on ...

...90 degrees. Pull bulb out of headlight assembly. 3) Disconnect harness connector from bulb (gently pry, it's plastic) 4) Installation is reverse of removal. (Do not touch halogen bulb with bare ...

Question about BMW 318

1 Answer

...slam back down and crack the glass. rotate/spin the whole wiper blade 90 degrees, counter clockwise, and then pull the blade straight back off the wiper arm. install the new one in the opposite ...

Question about BMW 318

1 Answer

90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.3.After valve is removed, check condition of two valve O-rings (2). ___________

...90 degrees past Top Dead Center (TDC), to make sure the pistons will not contact the valves upon assembly. Carefully rotate the crankshaft clockwise so the timing mark on the crankshaft sprocket and ...

90 degrees counter clockwise. Pull bulb out and disconnect wiring harness. replace bulb then reverse steps. For the passenger you will have to remove the aircleaner box. to do this pull up on the box,

Question about BMW 318

1 Answer

...rotated about 90 degrees clockwise. Once in this position, if you pull the safety clip towards you, it comes completely out, which then permits the gearshift rod to seperate from the operating

Not finding what you are looking for?
1999 BMW 318 ti Logo

658 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1996 BMW 318
1996 BMW 318

796 Questions

1997 BMW 318
1997 BMW 318

400 Questions

2002 BMW 318
2002 BMW 318

14 Questions

2003 BMW 318
2003 BMW 318

8 Questions

1994 BMW 318
1994 BMW 318

10 Questions

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...