...head gasket and maybe a WARPED head. The solution would be removal of the head, replacing the gasket and shaving the cylinder head! But if u insist, try RE-TORQUEiNG/TiGHTENiNG the head bolts w/ ...
...head gasket IF you clean the head and block properly then the head gasket will have its own sealer in the gasket. The secret is to torque the head bolts down in the correct sequence . I do head ...
Question about Cars & Trucks
...head gasket at fatcats other weekend, had a top end rebuild and head ported checked waterpump etc.. carb cleaned and checked run lovely last weekend for 3 sessions. Went to kierdan this weekend 1 ...
head gasket? Won't Liquid Glass Metallic Seal-up work for either problem individully or both together? If you don't know the extent of the damage do not add any kind of sealers to your motor. It doesn
...Head gasket is not sealing water jacket. Coolant is seeping into the push rod hole down to the lifter. Somthing went wrong with the gasket when setting head onto block. Did you ding the gasket?.OR ...
...head gasket.It still starts up,it runs a little rough,but does drive ok otherwise. What is your opinion on using a head gasket seaker to do a temporary fix ?? luckily, there is no fuel, or oil in the ...
...head or gasket. It not worth doing a head job on. Is there anything that could be added to slow it down just to drive locally? I may be the head or head gasket, but the intake gasket can do the same ...
head gasket or there is a crack on the engine block. Stop as soon as safely practical at home or wherever you will work on it. Before you spend lots of money, try an engine block sealer, less than $15
...head and gasket. I just had that same thing happen last month. When it over heated is the time that you blew the engine head's gasket. When you kept driving it is when you damaged your engine head. ...
658 questions posted
Usually answered in minutes!
796 Questions
400 Questions
14 Questions
8 Questions
10 Questions