1997 BMW 318 "3 head torque" Questions

how many degrees do i tight tha bolt for head angen The head are torqued down in 3 steps (1) tighten to 30nm or 22 ft lbs. (2) torque angle 90 degs. (3) torque angle 90 degs.

cylinder head to engine block torque. This is often done in a 3 step process, using a torque wrench, and a torque angle gauge. Are you planing on installing an engine yourself? I can get specs for you

...Thankyou Hi, I guess this is an E36. Head bolts should be renewed if heads been off, as they are stretch bolts. Tightened in 3 stages, 1st 30-35 nm 2nd + 90 degrees, 3rd + 90 degrees. Hope that ...

...HEAD TORQUE SETTINGS BMW 318TI THANKS hi this has to be done in 3 stages, leaving 20 to 30 minutes between tightening's they are as follows.. stage 1: 30Nm leave 30 minutes stage 2: 90 degrees turn ...

...3: turn cylinder head bolts in sequence an additional 90-degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the ...

...3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel only gives the initial settings. I have the tighting sequice, need ...

...up to 65 ftlbs. Don't have the ... Head bolt torque Feb. 23, 2002 Torque Specs Nov. 3, 2019 Head Bolt Helllppppp! Apr. 3, 2010 Head Torque Specs Nov. 3, 2019 More results from ...

HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs). In sequence, torque all bolts. Torque: 50 Nm (37 ft

...| 16 12 8 4 3 7 11 15 | --------------------- Final torque must be reached in 3 equal steps Recheck final torque in sequence Hope helps (remember comment and rated this). 2002 saturn vue head ...

...uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. ...