1996 BMW 318 "clutch plate" Questions

...AROUND LINES TO CLUTCH MASTER CYLINDER AND CLUTCH SLAVE CYLINDER.IF FLUID LEVEL ALL GOOD. LOOK FOR A BROKE CLUTCH RELEASE BEARING OR FORK.CHECK FOR BROKEN DIAPHRAGM SPRING IN CLUTCH PRESSURE

...clutch plate will be sticking on the shaft untill you get it upto a higher speed,, that means you will need a complete clutch fitted, because as its slipping it is burning the clutch plate away,, you ...

the clutch has no tention it like thera no hydrolics bad clutch master cylinder, line, or slave cylinder, ot last but not least pressure plates, very limited info i had too go on sorry

...clutch so there is free travel after engagement if this doesn't work the pressure plate springs are failing but I don't think so it only happens in 4th gear so I think it's just an adjustment or a ...

...in distances.with out your tranny oil pump not operating.while towing it.the oil pump- forward clutch and friction plates become damage from lack of fluid.causing

...plate and clutch disc from flywheel. INSTALLATION: Position clutch disc and pressure plate assembly on flywheel, noting following: Three flywheel housing to block dowels on flywheel must be properly ...

...clutch plate dont know which side to presure plate. Hi, look at the clutch plate centre hub. The side which fits to the pressure plate is generally raised further than the side which fits to the ...

...clutch plate Here are the torque specs for the flywheel and clutch plate on a 2003 Kia Spectra: Flywheel: 78 - 80 ft-lbs (106 - 112 Nm) Clutch plate: 19 - 21 ft-lbs (26 - 29 Nm) It is important to ...

...clutch pressure plate has become weak. When you press the clutch pedal the release/throwout bearing presses against the centre of the clutch pressure plate. This causes the metal 'fingers' -the ...

clutch plate location need to adjust clutch plate as soon as posible Hi Timothy, The clutch plate is fitted between the gearbox and the engine. Adjustment is carried out by lengthening or shortening ...