...rod so that when you undo the fasters for the rods, the rods don't fall down to the bottom of the tailgate. I actually used alligator clips off a multitester as they were handy, but you get the idea. ...
...tailgate. 6. The handle assembly is now free to come out. Hold on to it as you lift the tailgate back up. Don't shut the tailgate all the way. 7. Work the old handle out. I did not take any of the ...
...tailgate latch on 2005 avalanche Welcome to FixYa.com Latch Replacement - Endgate Removal Procedure 1. Lowerthe endgate. 2. Loosen the handle bolts. 3. Raise the endgate. Image 4. Remove the handle ...
Question about Chevrolet Avalanche
...tailgate that hold the latch assembly in. When it is loose, use a screwdriver to open the blue/green plastic clips and free them from the threaded rods (right and left). Then use a screwdriver and ...
...rod from the tailgate as an assembly. · If required,remove the actuator rod from the latch. You will have to remove the tailgate cover. The cover will most likely be held on by some of the ...
...tailgate on the backside of the latch assembly. lightly pull the lever assembly forward, but do not try to pull it out. The rod that came loose will be in the general area of the lever assembly. Most ...
Question about Cars & Trucks
...tailgate The right side rod should still be attached to the lock mechanism if it is broken away from the handle assembly. Completely remove the handle assembly and look inside the tailgate to see if ...
Question about Chevrolet Avalanche
...tailgate handle is attached to two rods with each one controlling a separate lock. If you raise the handle you may find a spot where you can see the rods in behind the fulcrum point of the handle. If ...
...handle assembly,how can i open the tailgate with the minimum of damage?,help please. Remove the trim panel from inside the car and release the push rod that works the lock and you can manualy open
Question about Chevrolet Avalanche
...rod into the hole and find the retainer clip to keep it in place. Take some WD40 and spray the latch release in the center of the tail-gate and then spray on the latches on both ends of the tailgate. ...
615 questions posted
Usually answered in minutes!
538 Questions
471 Questions
445 Questions
231 Questions
97 Questions