2006 Pontiac Montana SV6 "repair back plastic cover" Questions

back...how can I repair that depends on the sort of noise ,is or could it be a bearing?? if so then take the timing cover off and look for the tensioner and this is a bearing so use a thin screwdriver

...repair, you can remove the 4 bolts that hold it on but the bolt ends by the nuts will have to be soaked in solvent as they are exposed. You will need a long 13mm wrench and the head of the bolt is ...

...back of my X3 that were fixed by a Mobile repair that BMW called on the site of the dealer -- it took the guy about 45 minutes and cost me 125 dollars canadians.. make an appointment with your bmw ...

...repair and put the cover back on. Before you start, get a box of hog-rings and a pair of hog-ring pliers to crimp them with back in the same holes you removed them from. As for the head rest, there ...

...plastic snaps holding this on, all around the edges. Now there is another metal cover over the latch mechanism under this panel. Remove this. You now can see into the latch area and put the handle ...

...repair the linkage through either replacement, or by putting it back together, if a plastic joint came out of its socket. Sometimes, too much ice can cause a plastic joint to pop out. In many cases, ...

back. A windshield technician would know how to remove these parts without damaging it beyond repair. If you haven't done it before, successfully, I wouldn't do it. Allow a technician to do it, you'll

the back doors of my 1995 jeep cherokee will not open from the inside or outside, how do i repair them? remove plastic cover and lube lock

...snapped back into place with the plastic holder still in place. You can also get a new plastic piece or wire to hold it into place. I think mine was shut to hard over just wiggled out over the

...repair manual please? i am looking to replace the low beam headlight bulb for my honda accord 2000 SE model. i want to know how i can dis-assemble the head light assembly. The closest discount auto ...