2006 Pontiac Montana SV6 "fix power sliding door chevy" Questions

...fix the problem. I've had the sensors replaced, motor services, comp chip 'reset' numerous times, the sensors cleaned repeatedly, etc,,, I have a 2006 SV6 with the power sliding doors. The problem ...

...Fix and Maintain those Power Sliding Doors (youtube.com) 2007 Chev Uplander Door Lock Repair - Doors won't Lock (youtube.com) This Is CLE (youtube.com) SOLVED: Chevy uplander rear liftgate will not ...

...power door will only close half way. how do I fix that the drivers side sliding door closes half way and the stops Look too see in the bottom of your door track to see if there's something stuck in ...

...fix is a new power sliding doo module,,,once in a while there is a obstruction in the lower sliding door track like a piece of foam,if thats there remove it and lube the track with lithium grease, ...

...fix this. Otherwise you will have to pull the psd fuse and breaker from the right side dash fuse box. there should be a switch on the upper console to turn off power sliding doors. check to make sure ...

...power sliding door alarm to stop dinging. I cant get the power sliding door alarm to shut off even when the door is shut. I have a 2006 SV6 with the power sliding doors. The problem that I found was ...

...power side passenger door for a 2001 Chevy Venture van works every so often. The door doesn't move when the button is pressed on the panel in the headliner. The key remote doesn't work most of the ...

...Power Window Motor Fix? What is the most cost effective solution to replace the passenger side window motor on 4 dr 2005 Cavalier? the cheapest way to replace your window motor would be to go to a ...

power side door will not work I have a 96 Chevy Lumina with an electric sliding side door. A few weeks ago we started having problems with it. I went to work and when I got ready to leave it would not

...power sliding doors. The problem that I found was with the contacts on the door ( They are called plungers) the movable pins were losing connection with the fixed part The plunger is very easy to ...