2001 Oldsmobile Silhouette "remove power steering pump" Questions

Ad

Question about Oldsmobile Silhouette

1 Answer

remove the power steering pump. Remove the power steering pump braces. 2 Disconnect the spark plug wires. Using a 9/16 mm wrench, remove the valve cover bolts. Lift the valve cover to remove it. Using

Ad

...POWER STEERING PUMP, BELT TENSION ASSEMBLY. EVERYTHING OK FOR ABOUT 2 WEEKS AND NOW THERE IS A KNOCK OR RATTLE COMING FROM THE FRONT OF ENGINE. WHEN BELT IS REMOVED THE NOISE GOES AWAY. CHANGED WATER ...

Ad

Question about Oldsmobile Silhouette

2 Answers

remove the alternator,of course the power steering pump has to come of also and tensioner and plate behind the tensioner has to come off to be able to get the alternator out.If this was at all helpful

Question about Oldsmobile Silhouette

1 Answer

...power steering fluid. Remove coolant hoses and fuel lines. And remove the half shafts for front wheel drive. Then detach the motor mounts/transmission mounts. Of course, theres a lot of other stuff ...

Question about Oldsmobile Silhouette

1 Answer

...power steering pump or water pump does. It will have two wires connected to the back side of it. One large wire and one small wire that connect through a plug that clips into a receptacle built into ...

Question about Oldsmobile Silhouette

1 Answer

...power steering pump - I have read that I need to remove the front right tire to get to? Do I need to remove a pully to get to this sensor? Thanks! DTC P0341 will set if Camshaft Position (CMP) sensor ...

Question about Oldsmobile Silhouette

2 Answers

...remove the power steering pump on a 2006 pontiac grand prix 3.8L Power Steering Pump Replacement Removal Procedure 1. Remove the accessory drive belt. 2. Raise and support the vehicle. Refer to ...

Question about Oldsmobile Silhouette

2 Answers

...Remove the power steering mounting bolts from the power steering pump. 8. Remove the power steering pump from the engine. 9. Remove the power steering pump pulley from the power steering pump. 10. ...

Question about Oldsmobile Silhouette

1 Answer

...power steering pump. Remove the mounting bolts and the power steering pump from the engine. Remove the reservoir and pulley from the pump if necessary. To Install: Power steering pump ...

Question about Oldsmobile Silhouette

2 Answers

Remove the power steering pump pulley from the pump shaft using Pump Pulley Remover T69L-10300-B, or equivalent. Remove the 3 bolts retaining the power steering pump to the power steering pump support

Not finding what you are looking for?
2001 Oldsmobile Silhouette Logo

609 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...