...start but no power on gauges etc. Took out the BFC BATT fuse, all gauges etc. come on but cannot start car now. Will not even turn over, put fuse back in, car will start but no power inside of car. ...
...battery is either flat or wont hold charge. When you start a car ALL the power goes to do that. When you get a jump you are actually using the other cars power as well as yours. Replace your
...start working until after the engine is started. It supplies electrical power to the engine after it has started and also recharges the battery. If the engine is cranking over but not starting it is ...
my car will not start my car wont crank, still have power, tried using jumper cables but still won't start will it crank in neutral ? do you have power at the starter post ?
...of a Bad Alternator. You can Run on what is left in the Battery for a Little while and if it sits for a While the Battery will retain enough Power to Start. You may need a New Battery in
...POWER STEERING FLUID LEVEL STOP DROPPING.START ENGINE LET IT RUN FOR 10 SECONDS.THEN TURN OFF ENGINE CHECK POWER STEERING FLUID ADD FLUID IF FLUID LEVEL DROPS. WHEN FLUID LEVEL STOP DROPPING.SAFELY ...
start but it has power? Turn the key and all the gages and everything on the dash power up, the car just won't start. I think it may have something to do with the security system but i do not have the
POWER STEERING PUMP TO CORRECT FLUID LEVEL.THEN LET IT SET FOR 2 MINUTES UNDISTURBED.THEN START THE ENGINE RUN IT FOR 2 TO 3 SECONDS.ONLY CHECK THE RESERVOIR AND ADD MORE FLUID AS NECESSARY.REPEAT THE
...POWER STEERING DIP STICK AT COLD LEVEL.NOW START CAR UP LET IT IDLE FOR 3 MINUTES.THEN TURN OFF ENGINE CHECK POWER STEERING FLUID IF FLUID LEVEL DROP ADD LITTLE MORE UNTIL LEVEL ON DIP STICK ON COLD ...
1,543 questions posted
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
830 Questions
662 Questions