2000 Oldsmobile Alero "3 engine head bolt" Questions

...engine bolts 3 water pump-to-timing chain housing nuts Water pump and cover assembly Water pump cover from the pump Fig. Exploded view of the water pump mounting-2.4L engine continue... Hi, What type ...

3 different mecahnic shops and nobody can find out the problem. i would just junk the car but i have about $15,000 under the hood and its my racing car and i had it since it was brand new.. so anybody

...engine head and carefully unplug the wiring connector on the module. this will let you lift the coils assembly out after removing the 4 bolts. the coil assembly is pressed into the rubbers which will ...

3-4 hours and i have lots of experience on car work.i am also into designing and welding, and looked at worries about the bracket cutting does not weaken it enough to worry it was designed like it was

engine and threw the water ports to cool it down. This is a very common problem with these cars. It is the lower intake manifold which leaks coolant. The repair is very expensive, but with some simple

engine you have, I've pulled torque specs for 3 different engines. Also, since I can't include a diagram showing the relative locations of the numbered head-bolt locations, it would be a good idea for

the cylinder head. 3. Lubricate the bolt threads and seat surfaces with clean engine oil and install them. Torque the bolts in 2-3 steps to 56-60 ft. lbs. (75-81 Nm) in the proper sequence. Hope helps

...Torque Sequence Fig. Main bearing torque sequence-2.4L engine Fig. Main bearing torque sequence-2.5L engine Fig. Main bearing torque sequence-3.3L engine Fig. Main bearing torque sequence-4.0L ...

...engine | 16 12 8 4 3 7 11 15 | --------------------- Final torque must be reached in 3 equal steps Recheck final torque in sequence Hope helps (remember comment and rated this). 2002 saturn vue head ...

...3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel only gives the initial settings. I have the tighting sequice, need ...