ignition timing I need the ignition timing for my car. If it is timed on one it absolutly does not run right. Anywhere else it does not run. first you have to remove the shunt, then you set the timing
Question about Nissan Xterra
all done electronically by the ECM and the Crankshaft Position Sensor. The days of timing lights and marks are long gone. https://www.google.com/search?q=04+Nissan+Quest+3.5+setting+ignition+timing ..
...ignition be set to run on unleaded petrol so no damage will be caused to valves. ****. Hello Michaelatkin : Is this jaguar US based as far as specifications ? US-Based with engine running and Timing ...
Question about Cars & Trucks
...ignition timing regulated? Car gets 99 BTDC on ignition timing and failed SMOG Test in CA. Listed as GROSS POLLUTER. Passed SMOG Test at 25 mph but failed at 15 mph with 3,951 NO PPM (MEAS) something ...
Question about Nissan Cars & Trucks
...on this,,, what timing are youtalking ignition or valve ? 10 degrees btdc is about right so check for other problems like crank /cam sensor position sensors , immobilizer ,or ignition control ...
ignition timing was 10 degrees BTDC @ 700rpm For 80 and up zx, non turbo - 8 degrees BTDC +- 2 degrees @ 700rpm turbo - 20 degrees BTDC +- 3 degrees @ 700 rpm Also done with distributor vacuum advance
...ignition timing: 30 BTDC. How do I adjust this and where should it be at? hey why dont you buy a timming gun or borrow from somebody and time it with that, make sure its 12 degrees btdc and make sure ...
...Ignition timing should be set at 10 degrees BTDC (before top dead center), with vacuum advance hose disconnected and plugged, engine idling at 800 rpm or less. Align the engine timing marks at TDC ...
...Ignition timing connector. I disconnected my timing bypass connector. to time my truck. Set Timing to 4 degrees btdc. When I reconnected my bypass connector the mark on my damper should have move ...
...ignition timing what is vw camper ignition timing on t25 If it is really a 1986 the spec is 5 degrees before top dead center at idle. Much better (and easier) to set at 35 degrees BTDC at 3000
697 questions posted
Usually answered in minutes!
568 Questions
522 Questions
289 Questions
263 Questions
259 Questions