2001 Nissan Maxima "change crank sensor" Questions

Ad

...change every thing cam sensor crank sensor coils 5 of them ecm harness once put back orginal in it cause that wasnt the problem still no spark got continuity from sub harness of the crank sensor got ...

Ad

2001 maxima wont start after changing crank and cam sensors i changed both crank sensors and cam sensors the car starts sometimes on one crank turn it off it wont start again . leave it alone for a ...

Ad

Question about Nissan Maxima

1 Answer

...change it Yes, cam sensor can cause a hard starting condition, but not that common on a 2000 maxima. I haven't replaced single one on a 2000 Max and I have one also (maxima that is) . Never had any ...

Question about Nissan Maxima

2 Answers

...crank angle sensor. replace the cam sensors too. nissan had problem(there is a campaign) with those, so they came out with a crank and cam sensor kits. get the kit ( at a dealer ) and install it. ...

...and has a knock when it starts Could be the cam sensor bad, crank sensor, knock sensor or a problem internally in the engine itself. You also need to change your fuel filter if you haven't for

sensor but still does the same if vehicle hesitates to start do you mean long cranking time (posible fuel pump) or no crank at all then suddenly starts then it is possible starter solenoid (notorious)

Question about Nissan Maxima

2 Answers

sensor recently installed for unrelated issue. My car was having the problem I had my ingnition switch change, stater and a new battery and now it's fine. My 1996 Maxima with 115K miles has difficulty

Question about Nissan Maxima

2 Answers

...change crank sensor, still no spark try checking your Distributor cap maybe even the timing belt. If there is no spark has to be either or one of those check to see if your maxima has a motor mount ...

Question about Nissan Maxima

2 Answers

crank sensor. (I'm not sure if nissan works the same way). Crank sensor suppose to send a signal to fuel injector reporting the RPM. if it's cracked, it would report a lower voltage( less than 800 RPM

Question about Nissan Maxima

1 Answer

NOT GETTING FIRE I CHANGED THE CAM AND BOTH CRANK SENSORS CHECKED THE FUSES AND RELAYS WHATS NEXT you know that when you change the cams you have to put them marking with the timing chain silver links

Not finding what you are looking for?
2001 Nissan Maxima Logo

798 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Nissan Maxima
2000 Nissan Maxima

1,309 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,122 Questions

1996 Nissan Maxima
1996 Nissan Maxima

1,007 Questions

1997 Nissan Maxima
1997 Nissan Maxima

857 Questions

2004 Nissan Maxima
2004 Nissan Maxima

783 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...