2003 Mitsubishi Galant "remove transmission side cover 03" Questions

...don't have to remove the transmission to get it, but it does have to be lowered enough the get the cover off. It does require removing the valve body. There are check balls in it that will fall

transmission oil cooler lines. Remove oil pan-to-bell housing bolts and bolts at crankshaft position sensor lower shield. Remove remaining oil pan retaining bolts. Remove steering shaft pinch bolt and

...remove the transmission pan bolts. Start at the front and work your way to the back. As you get to the back few bolts the fluid should start draining. slowly remove the rest of the bolts at the rear ...

transmission cooler which is mounted in front of the radiator. You can see the mount through the grille. If the mounting bolt has a grommet, and the cooler is not leaking, you are done. If it does not

transmission fluid. and oxygen sensor. Run some fuel injection cleaner in the gas tank. Remove the intake hose and clean out the throttle body with some carb cleaner 1993 suburban runs for awhile then

...cover gasket." In return we would get nowhere. After we learn the problem, "After" we can then properly search google for the solution. For example the proper term would be, "What year did the vortec ...

...transmission valve and valve body. When doing the solenoid shock treatment, if the solenoid clicks then it is probably good. If it does not click then pretty much guaranteed the valve is stuck ...

...transmission in my 03 sante fe. I cannot separate the motor from the tranny or the awd unit. What can I do? Below are directions to remove the engine. The engine and transaxle assembly have to come ...

remove the plastic cover which in front of the wheel and covers the battery. If you look straight through to the transmission you will see a tan colered sensor on the side of the transmission which is