2002 Mazda Protege "steps remove gas tank" Questions

...steps do i need to take to replace the fuel pump to take the seat out you have to pull up on it hard. before u start connect the neg. side of the battery. open the gas cap to help to let the or some ...

...gas tank and then the fuel sending unit can be removed from the tank. REMOVAL AND INSTALLATION Fig. 1: Fuel pump unit Disconnect the negative battery cable. Relieve fuel system pressure. Remove fuel ...

...remove the gas tank in order to replace the skid plate under the gas tank? Or when I remove the skid plate will the gas tank become lose? I do not know about your specific vehical, but I do know that ...

...gas tank to hold it up.when straps are off make sure to remove the wire's off the top going inside to tank.then slowly lower tank down then pull it out from under car then get a hammer and a screw ...

...one. You either make one yourself or lower the gas tank. See the link for guidance on lowering the tank and replacing the fuel pump. 06 Chevy Tahoe remove gas tank and replace fuel pump step by ...

...gas tank out from under the car, unbolt the sending unit from the tank (either has screws, bolts, or a lock ring). lift the sending unit with attached pump out of the tank. remove and replace pump. ...

...gas tank, on top of gas tank If you are thinking of completing this task yourself. I would invest in a Haynes or Chilton's Repair Manual. It has step by step instructions with pictures for a big task ...

...remove the gas tank to replace it, then you will need to empty the tank if you are able. You can buy a pump to siphon the gas for about ten dollars. Put a jack under the tank and jack it up to the ...

remove gas tank? if it is to replace a fuel pump you will find that you have to do that from the trunk. it is very hard to remove the tank in a bonneville, the entire rear suspension has to be removed

...steps to remove the fuel tank. First step is to drain the fuel tank of gas. You can do a search on the web " how to drain a fuel tank" If you do not have the car on a lift, and you are working on the ...