2002 Mazda Protege "know tension pulley bad" Questions

Ad

that is know to happen is the belt tension pulley has gone bad and needs to be replaced. Recap, check the routing of the belt, belt length, tension pulley for any damage. Good luck and hope this helps

Ad

...tension pulley is the most common to go bad and can be replaced in about 15 min with common tools. Both pulleys can be bought at Auto Zone or Parts Source and they can give you the setp by step ...

Ad

...tension arround the A/C pulley.... I drew up a design to re-route the belt, and took measurements for the new belt size. The only issue is, the new belt route requires one of the idle pulleys to run ...

...know when a tesion pulley goes bad how can you tell if a tension pulley has gone bad Shannon, sometimes the spring will break , sometimes the pulley will come off, but most times the bearing will ...

...know how to adjust the tensioner and if I need a special tool to do it. Thanks.. the tensioner simply needs to be retracted and held back upon removing the belt. use a 3/8" ratchet to place into the ...

know why If it is breaking, you may have a frozen pulley, bad bearing, etc. If it keeps popping off, one of your pulleys is misaligned. The most common pulley to cause this problem is the Idler Pulley

Question about Mazda Protege

2 Answers

tension is goon. How do I know if the compressor is bad I would start with a can or brake clean and spray some of that on your belt as it is turning and see if there is some dirt on the belt making it

...know the 2000 V8 engines had bad tensioners. Could it be a loose starter or the starter drive is hanging up in the flywheel teeth? Could it be a really bad DRIVE BELT TENSIONER or the idler pulley ...

Question about Mazda Protege

1 Answer

...tension belt before so I know that is the problem. (Same symptons). How difficult is it to repair? How many hours? What should it cost me? Hi, I assume you mean you have replaced the serpentine drive ...

...know what else to do. My husband is disabled and thankfully he hasn't been with me the 5 times it has happened. HELP!! Sounds like a bad tensioner. Some cars have automatic tensioners and some are ...

Not finding what you are looking for?
2002 Mazda Protege Logo

875 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...