2002 Mazda Protege "change fuse speed meter" Questions

Ad

Question about Mazda Protege

2 Answers

...speed sensor cable and use an ohm-meter to check the resistance of all four sensors (they should all be similar, but don't remember the value exactly). There is a way to just disable the ABS by ...

Ad

...speed models it is on top of the casing. To test the switch, disconnect the wiring connector and use a multi-meter set to resistance function, select reverse gear and test for continuity across the ...

Ad

...change speeds loose fuse? loose conn to wiper? bad switch.? bad wiper motor? or just icing up, was it? we use what is called a volt meter, we measures the voltage at the wiper, if it drops out , work ...

Question about Isuzu Cars & Trucks

1 Answer

...fuse must not be blown out. dash box. marked as Meter and Audio, ignore names, 10 and 15 fuses both good. electronic, speedo it is. and same for VSS vss for 2wd not same as 4wd, 2wd is on rear of ...

...fuse Its possible that it's related to the vehicle speed sensor (VSS). Try engaging the cruise control. If it does not engage, I would suspect the VSS signal is not getting to the PCM. Broken wire, ...

...fuse? I have a 2006 AWD Pontiac Torrent the AC/Heat doesn't work, I've changed all fuses for the HAVAC and still no AC/Heat blowing out of vents. What could be the problem? Could be a number of ...

Question about Mazda Protege

1 Answer

...fuse is tested and is ok. What could be the problem? Greetings Marc I think you may be suspecting the ABS speed sensors but , this is not connected to the road speed of the vehicle The speedo will be ...

works and other days it just doesn't work, its very strange. Any suggestions? There is 2 harnesses near the bottom of the steering column that you should check. Also change the block fuses in fuse box

...fuse.Had lights and power back,engine starting.Had turned ignition on and off several times to do tests.Not sure if it was a poor contact at something I changed or maybe an imobiliser issue.Working ...

...speed sensor wires turn the meter to A/C volts low scale. Turn the wheel one revolution per minute you should get a lease 350 to 500 A/C volts on each front wheel. If you don't replace the sensor. If ...

Not finding what you are looking for?
2002 Mazda Protege Logo

875 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...