2005 GMC Yukon "replace rear hatch door actuator" Questions

...HATCH ACTUATOR BUZZING 2005 GMC YUKON REAR HATCH ACTUATOR will Buzz when locking the door. Does the actuator need to be replaced? Check the ground to the actuator, if that is ok replace the

...rear lock actuator and measure battery voltage at actuator if above 13.6 replace actuator if below specs. check grounds and alternator out put as follows, alternator output 13.7 to 14.25 volts. key ...

...rear window to open/unlock and the back hatch. what is the problem and how can i get it fixed. {: ) The usual problem is on the rear door actuator and it comes with three cables, serviced as an ...

...to try to remove hatch panel to get to the latch to lube it or replace it. How much would it cost to replace the rear temp control actuator? Would this require a certified tech. or can I do it

rear hatch may be bad, I had to replace 3 actuators all at one on my van. I have the same problem with my drivers door you are having with your doors, today I'm gonna pull the door panel off and check

rear hatch complete door wont 2004 GMC Envoy rear hatch complete door wont open.....keyless entry not working weird clicking sounds when using the far rear fans and rear windshield wiper does not work

...rear switch is 4.67k ohms when pushed When I put 12 volts to the actuator it pops fine. When the actuator is on the open position, the dash message recognizes the hatch is open. Based on the ...

...actuator? I have the same problem. The rear door actuator is bad. you have to remove the interior cover and pull on the 2 cables that release the hatch door catch. replace the lock actuator ...

rear door (hatch) is gone and the door falls back down on you. How do you fix? There are two actuators (long vertical bars) on either side of the hatch. They need to be replaced with new ones as those

...rear hatch panel to replac actuator Release and raise the rear hatch using either the unlock button on the inside of the driver's door or a keyless remote, locate the hatch release on the inside ...