2006 Dodge Stratus "replace crank shaft sensor 2000" Questions

...se it keeps shutting off while driving i've replaced the computer,fuel pump,spark plugs,battery,need help please change both crank shaft sensor and the camshaft sensor.the must be changed as a

...I replaced the fuse and reconnected the wire. It will turn over but no spark to plugs. It is not the crank shaft sensor as I already tried that. It also reads No Bus on the dash. so replace the ...

...crank shaft position sensor and the cam shaft sensor. it was a p0016 and a p0340 I replaced both of the sensors and the car still will not start. I'm thinking that it might be the timing belt. am i ...

...crank shaft sensor Probably defective or incorrect sensor, sensor wiring connector problem (bent or corroded pins), improper installation (wrong orientation, not seated properly), etc. Why did you ...

...crank shaft senor 2000 quest stopped while driving have replaced fuel pump and filter and crank shaft senor still won't start I suspect you have a bad camshaft sensor. It is part of the distributor. ...

crank shaft sesor/cam sensor problem? my check engine light came on and my car started puttering when i gave it gas. My body had a diagnostic tool and we figured out that it was ether the cam shaft ...

Replacing crank shaft position sensor on 2000 Honda Civic How do I replace the crankshaft position sensor on a 2000 Honda Civic? ...

turning over wont start mercedes e240 turning over wont start not out of fuel censor on crank shaft faulty replaced it starting ok your right,, crank shaft sensor.

...Carlo 3400 Hi Zachary,here's a link to a repair guide showing you where your Crank Shaft Position sensor is and how to replace, Repair Guides Components Systems Crankshaft Position Sensor AutoZone ...

replace is it the cam shaft positioning sensor or maybe a fuel filter. Your answers are appreciated Try depressing the gas pedal once before cranking. If it fires right up then replace the fuel filter