key into ignition cylinder and turn it to the ON (RUN) position. The security light on the dash will illuminate and stay on for ten minutes. 2. When the security light goes out, you have one minute to
...ignition[ key ] system u might have to have it towed to dealer for them to hook up vehicle[contact dealer and advise what is happening and also recheck new key] for reprograming or reset system..some ...
...ignition doesnt even like click or anything. The security light being on is why your vehicle will not start.You need to get the codes to find out what is causing the problem.What you can do is when ...
...ignition key to the run position and pull the fuse to the ECM (batt) for 30 seconds then place it back in. Start the engine and it may stall but let it, Don't touch anything just start it again. The ...
...Ignition key is removed. Refer to Retained Accessory Power Description and Operation for more information on the retained accessory power (RAP) function. You mite want to thing about taking your ...
...key back to the off position and start. This becomes troublesome however, when you don't have an extra 10 minutes to spare everytime you need to start your car. The solution that I opted for was to ...
stay out. When your doing all this waiting with the key on turn off anything that may run the battery down radio heater interior lights and if you have been fooling around with it very long before you
...key in the ignition and leave in the ON position 10-15 minutes but who wants to do that all the time, and this always seems to happen at the worst time. If you take it to a dealer they are in most ...
...key in the ignition in the "ON" position and wait 10 minutes. Make sure the security light is flashing. After 10 minutes the security light will stop flashing and either turn off or stay on steadily. ...
3,287 questions posted
Usually answered in minutes!
1,746 Questions
1,386 Questions
1,400 Questions
1,452 Questions
1,181 Questions