1999 BMW Z3 "car cranks slowly stops" Questions

Ad

...slowly getting worste its a 2001 z3 roadster 3.0im i replaced the crank positioning sensor but did nothing unless im suppoe to reset something after puting that part in please help? replace the ...

Ad

...car for about 10 min went to start it...nothing the starter turned very slowly and then not at all so i charged battery overnight and changed starter now it cranks very slowly Check the electrical ...

Ad

car would only go slowly when I pushed the gas pedal. I then stopped the car and turned it off then cranked it again and put it in gear and made grinding noise. I turned the car off again and waited a

Question about BMW Z3

1 Answer

...slowly a few times before it stopped and clicked. What would make it do this. The battery seems fine because the headlights and all work. Thanks, Jared It's the battery. Remove and have it tested ...

2004 Aveo - gas pedal hung up going down road. Put in neutral and revved motor to unstick. Something started rattling like a bearing. Drove a little further...only made noise when stopped and idling. ...

...car cranks over, makes missing a belt While making a stop at a store the steering became hard to steer; took-off, then a little ways up it the car slowly starting dying out. Got started and drove for ...

Question about BMW Z3

1 Answer

...car reaches past 2k rpm it feels rough on transition to next gear. I have to accelerate slowly otherwise it idles funny and shuts off at next stop. Sometimes it will shut off and you can hear it ...

how do you find tdc for a 1991 honda prelude 2.1 remove the #1 spark plug. rotate the engine in the direction it rotates when operating. use a socket and ratchet on the crankshaft bolt. while cranking

Question about BMW Z3

1 Answer

...cranks got slower and further in between until there was nothing. -dash lights are on. -power windows move slowly then stop -radio code message is on unit any info? its time for you to replace your ...

...A extension Rachet then turn Main Crank Shaft Slowly Complite turn If the belt stay on correcly ..Then Start engine then stop Check again For Belt Position if it Ok ..Your car it fix ... Good ...

Not finding what you are looking for?
1999 BMW Z3 Logo

140 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 BMW Z3
2001 BMW Z3

142 Questions

2000 BMW Z3
2000 BMW Z3

111 Questions

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...